View RD74HV1G34_1300997.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RD74HV1G34
High-Voltage Buffer gate
REJ03D0890-0100 Rev.1.00 Feb 20, 2007
Description
The RD74HV1G34 has one Buffer gate in a 5 pin package. Supports the wide power supply voltage and can use it for the other use as a general-purpose driver.
Features
* * * * * * * The basic gate function is lined up as Renesas uni logic series. Supplied on emboss taping for high-speed automatic mounting. Wide supply voltage range : 4.5 to 30 V Operating temperature range : -40 to +85C All inputs VIH (Min.) = 3.5 V, VIL (Max.) = 0.8 V (@VCC = 10 V to 30 V) Output current : IO short (Typ.) = 70 mA (@VCC = 15 V) Ordering Information
Part Name RD74HV1G32VSE Package Type VSON-5 pin Package Code (Previous Code) PUSN0005KA-A (TNP-5DV) Package Abbreviation VS Taping Abbreviation (Quantity) E (3,000 pcs / Reel)
Outline and Article Indication
* RD74HV1G34
Marking
R7
VSON-5
= Control code
These products designed for general and industrial use. It is not supported for special quality or reliability demanded use such as automotive or life support or something like that.
Rev.1.00 Feb 20, 2007 page 1 of 5
RD74HV1G34
Function Table
Input H L H : High level L : Low level Output H L
Pin Arrangement
NC
1
5
VCC
IN
2
GND
3
4
OUT
(Top view)
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings 0 to 30 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 50 75 100 100 200 -65 to 150 Unit V V V mA mA mA mA mW C Test Conditions
VI < 0 or VI > VCC VO < 0 or VO > VCC VO = 0 to VCC
The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 30 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C.
Rev.1.00 Feb 20, 2007 page 2 of 5
RD74HV1G34
Recommended Operating Conditions
Item Supply voltage range Input voltage range Input / Output voltage range Symbol VCC VI VI/O Min 4.5 0 0 -- -- -- -- -- -- -- -- 0 0 0 -40 Max 30 VCC VCC -2.5 -5 -10 -15 2.5 5 10 15 100 20 10 85 Unit V V V Conditions
IOH Output current IOL
mA
Input transition rise or fall rate Operating free-air temperature
t / v Ta
ns / V C
VCC = 10 V VCC = 15 V VCC = 25 V VCC = 30 V VCC = 10 V VCC = 15 V VCC = 25 V VCC = 30 V VCC < 5 V 15 V > VCC 5 V 30 V VCC 15 V
Note: Unused or floating inputs must be held high or low.
Electrical Characteristic
Ta = -40 to 85C
Item Symbol VCC (V) * 10 15 25 30 105 15 25 30 10 15 25 30 10 15 25 30 15 15 VCC 10 15 25 30 10 30 VCC Min 3.5 3.5 3.5 3.5 -- -- -- -- 9.0 13.5 22.5 27.0 -- -- -- -- -46 46 -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -70 70 -- -- -- -- -- -- -- 2.5 Max -- -- -- -- 0.8 0.8 0.8 0.8 -- -- -- -- 1.0 1.5 2.5 3.0 -95 95 1 0.5 1.0 2.0 2.0 1 5 -- Unit Test condition
VIH Input voltage VIL
V
VOH Output voltage VOL
V
Output current Input current
IOH short IOL short IIN
mA A
IOH = -2.5 mA IOH = -5 mA IOH = -10 mA IOH = -15 mA IOL = 2.5 mA IOL = 5 mA IOL = 10 mA IOL = 15 mA VO = 0V VO = VCC VIN = VCC or GND
Quiescent supply current
ICC
A
VIN = VCC or GND
Supply current Input capacitance
ISUPP CIN
mA pF
VCC = 10 V , VIN = 4.5 V VCC = 30 V , VIN = 4.5 V VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Feb 20, 2007 page 3 of 5
RD74HV1G34
Switching Characteristics
(CL = 50 pF , tr = tf = 5 ns)
Item Symbol Vcc (V) 10 15 Propagation delay time tPLH tPHL 20 25 30 10 15 Output rise / fall time tTLH tTHL 20 25 30 Min 15 10 10 10 9 8 7 6 5 5 Ta = -40 to 85C Typ Max -- -- -- -- -- -- -- -- -- -- 70 50 40 35 35 30 25 20 17 15 ns IN OUT ns IN OUT Unit FROM (Input) TO (Output)
Test Circuit
VCC
Pulse Generator Z out = 50
Input
Output
CL = 50 pF
RL = 10 M
Note: CL includes probe and jig capacitance.
* Waveforms
tr tf 5V
90 % Input 10 % tTLH 90 % Output 10 % t PLH 50 % 50 %
90 % 50 % 10 % tTHL 90 % 50 % 10 % t PHL
0V
VOH
VOL
Note: Input waveform : PRR = 1 MHz, duty cycle 50 %, tr 5 ns, tf 5 ns
Rev.1.00 Feb 20, 2007 page 4 of 5
RD74HV1G34
Package Dimensions
JEITA Package Code P-USON5-1.2x1.6-0.50 RENESAS Code PUSN0005KA-A Previous Code TNP-5D/TNP-5DV MASS[Typ.] 0.002g
D 1.0 0.1 5 4
L1
HE
E
1
3 c
Reference Dimension in Millimeters Symbol
( 0.1 )
( 0.1 )
e
b
D E A A1 A2 b b1 e Lp x y ZD c c1 HE L1
Min Nom Max 1.55 1.6 1.65 1.1 1.2 1.3 0.6
A
0.15
0.2 0.5
0.3
0.07 0.12 0.22 1.55 1.6 0.2 1.65
Rev.1.00 Feb 20, 2007 page 5 of 5
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of RD74HV1G34

	To Download RD74HV1G34 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .